Each parts

ALBISTONE Self-Supporting Swimming Pool

Back panel wall non-detachable, with locking pins for stability
Profile size of 35 x 50 mm, AlMgSi alloy, ELOX surface finish, WOOD DÉCOR Pine tree or WHITE color, 3 carrying sections on the module (2 sections at the module edges and 1 reinforcing section in the middle)
8 mm single-cell double wall clear polycarbonate with UV protection used as roofing material all over the entire enclosure. Heat passage coefficient of 3,3 W/m²K. This material contains NO DROP surface treatment which reduces full-area precipitation of air humidity on inner surfaces into the form of water drops
Door in the front side in the longitudinal axis of enclosure, doorway width 80 cm, hinged right-hand, lockable door with safety lock and child safety catch; the door in the open position will negotiate any obstacle without problems
7 cm axial distance between tracks, formed with triple-rail profile, ELOX surface treatment, parallel trackage, possibility to buy the extension, terminated with a stop end-piece
Front wall panel detachable using handles for easier handling of enclosure. It includes locking pins (2x) to provide stability
The bottom edges of the front and back panel wall of horizontal partition are 10 cm above the terrain; the gap under the partition is intended to prevent this bottom partition from hitting the upper edge of the swimming pool when modules are moving with the wall along the trackage. The gap is filled with top foil preventing heat dissipation and penetration of impurities